Tested and certified to BS 476 -22; E30 to BS EN 1634-1.
Smoke Control to Building Regulations Approved Document B resistance to the passage of cold smoke (max leakage 3m³/m/hour tested to BS476 Section 31.1)
- Sizes
-
- Purpose made to requirement, subject to performance limits.
- Door Core
-
- Thickness 44mm
- Weight 28kg/m²
- Actual finished door thickness varies depending on facings
- Solid High Density three ply chipboard.
- Durable and eliminates the need for additional sub faces and framing.
- Lippings
-
- 7mm hardwood square edged - four edges.
- Maximum protection to the core
- Enables Profiling /Edge planning to suit site dimensions when required.
- Options for factory profiling 2/3mm splay edge or 3mm radiused arrises to vertical edges.
- Seals
-
- Intumescent (fire) seals/Smoke Seals supplied with Doorsets
- Option for supply with Doors only.
- Door Facings
-
- Can be supplied with a wide range of Veneers, Primed, Painted or Plastic Laminate.
-
- Factory applied options – Stained, Prefinished AC Clear Lacquer, Primed or Full Paint.
- Glass and Glazing
-
- 7mm Pyrobelite Clear/Insulating
- Fully glazed apertures with hardwood flush glazing beads
- Configuration and Sizes in accordance with customer requirement/permissible areas
- Door Frames/Architraves
-
- MDF/Softwood/Hardwood to comply with Customer requirement, performance and appearance.
- Architraves to be applied using Intumescent mastic.
- Simple Frame profiles, architraves, screens and doorsets can be supplied to special order.
- Architraves are optional.
- Finishes to Frame/Architraves
-
- Factory applied options – Stained, Prefinished AC Clear Lacquer, Primed and Full Paint.
- Ironmongery
-
- Can be factory pre-machined for locks, hinges and other ironmongery as customer’s requirement.
- Ironmongery should be in accordance with Fire Certification.
- Option for Shadbolt Pacific supply of Ironmongery available.
- Mechanical Performance
-
- Severe Duty Class 4 to BS EN 1191, 1192 and 12400.
- Moisture Content
-
- Supplied ex factory with a moisture content of 10% +/− 2%
- Formaldehyde emission
-
- Less than 0.1ppm, complying with E1 standard
- Site conditions
-
- Temperatures in range of 13° C to 21°C (55°F to 70°F) and relative humidity in the range 40% to 60%.
- FSC
-
- Subject to Shadbolt Environmental and Sustainability policy. Details available upon request.
